Antop AT-601W Manual De Instrucciones Para Su Instalación página 5

2. Setting and Scanning
In the TV's setup menu, set the mode to "Antenna" or "Air", then, set TV to "Scan" for channels.
Consult the TV manual for detailed instructions.
Tips：
1. The ANTOP Smartpass Amplifier must be powered for function.
2. Re-scan the channels after each switching of the Smartpass Amplifier.
3. Scan channels monthly to find all available channels including newly added or changed.
4. Do not place or hide the Smartpass Amplifier and the antenna in/behind any metallic
objects.
5. Keep the over-the-air antenna away from any high power consumption devices to avoid
interference.
6. Move and rotate the over-the-air antenna at various locations for the best possible reception.
7. The Smartpass Amplifier is not recommended for use with an amplified antenna.
8. When using a Smartpass Amplifier with any non-amplified over-the-air antenna, note that
antenna effectiveness is also influenced by its distance from the signal origination point,
station signal strength level, building construction, antenna positioning, reflections from
nearby structures and any power consumption sources.The amount of free over-the-air
channels you can receive will vary by area and antenna selection.
CHANNEL SCAN
scanning for channels
4