Utilitech Pro MPL1009-LED40K840 Manual Del Usuario página 4

OPERATING INSTRUCTIONS
Tripod Leg Extension
To extend the Tripod legs, press the Tripod Leg
Lock Release Button (DD) and pull the Collar
Assembly (EE) down until the legs lock in place at
the bottom of the Tripod stand.
To return the legs to the folded position for
storage, press the Tripod Leg Lock Release
Button (DD) and pull the Collar Assembly (EE)
back up to the top.
Tripod Height Adjustment
The tripod height can be adjusted by releasing
the Height Extension Locks (H) and extending
the tripod to the desired height, then locking the
Height Extension Locks.
Attaching and Releasing Light Head
on Tripod
a) To attach the Light Fixture (A), align the Lock
Pin (BB) over the mounting hole of the Tripod (G),
push down firmly until the Light Fixture (A) clicks
into place.
b) To release the Light Fixture (A), squeeze the
Light Head Release Knobs (J) together while
pulling the Light Fixture (A) up and away from the
Tripod (G).
1
EE
DD
2
H
3
A
BB
J
G
Lowes.com
6
OPERATING INSTRUCTIONS
ON/OFF Switch
Each lamp has an on/off switch. Press the switch toward the " | " symbol to turn the lamp
on. Press the switch toward the "O" symbol to turn the lamp off. Always turn the work light
off before unplugging.
Adjusting the light direction
1. The vertical angle of the lamp head can be adjusted freely to the desired angle. The
swivel will automatically lock to pre-determined angles.
2. With the lamp head mounted on the tripod, the lamp head may be swiveled horizontally
by releasing one of the Height Extension Locks while turning the lamp head to the desired
direction and then locking the Height Extension Lock.
WARNING: RISK OF PERSONAL INJURY. To avoid being burned, always hold the work
light by its grip handle when making adjustments.
WARNING: RISK OF FIRE. DO NOT place work light near flammable or combustible
surfaces.
Extension cords
The maximum extension cord length recommended for this work light is 49 in. Use of
extension cords longer than 49 in. may cuase a voltage drop that can dim the lights.
Extension cords used with this work light must have an adequate American Wire Gauge
(AWG) or wire size for safe, efficient use. The smaller the gauge of the wire, the greater
the capacity of the wire (e.g. 14-gauge wire has more capacity than 16-gauge wire).
Use an extension cord or minimum 14-gauge (AWG) 3-conductor or higher capacity wire,
such as 12-gauge or 10-gauge for this work light.
Always make sure that the prongs on the plug of the extension cord are the same
number, size and shape as those on the work light plug.
Always be sure that the extension cord is in good electrical condition.
Storage
1. Always allow the work light to cool down completely before storing.
2. Store in a safe place, out of reach of children.
Lowes.com
7