Oakley RADAR PACE Guia De Inicio Rapido página 12

CHANGING THE LENS
To remove a lens from RADAR PACE, do the following. (To install a lens, simply reverse the procedure.)
1. With two fingers, carefully pinch the two nose bridge tabs inward.
2. Push the nose bridge toward the top of the frame until the lens releases from the top.
3. Pull the lens down and out.
1
ATTACHING THE AERO CLIP
By reducing wind noise, the Aero Clip allows RADAR PACE to hear you more easily when you are cycling at high speeds. It is
recommended for cycling speeds faster than 20 mph (32 kph). The clip attaches to the left stem of the frame.
To attach the Aero Clip:
1. Hold the clip so the thinner/longer section is orientated with the top of the frame.
2. At the front of the left temple, slide the clip into position.
3. Push the clip firmly until it locks into place.
1
12
2 3
2 3