Motorola Solutions RLN6434 Manual Del Usuario página 12

Mounting The Bracket
1. Select a location for the bracket that does not
interfere with vehicle operation or with the
vehicle's air bag deployment.
2. Using the bracket as a template, mark the
location of the three or four mounting holes
using either the bottom or back mounting
holes.
3. Using a 5/32" (4 mm) diameter drill bit, drill
the three or four holes.
4. Using a 5/16" (8 mm) hex nut driver, secure
the bracket using the three or four screws
provided.
Securing the Travel Charger and radio into
the Bracket
W A R N I N G
1. Insert the Travel Charger into the bracket at a
downward angle (See illustration below).
Motorola Solutions highly
recommends securing the Travel
Charger and radio into the mounting
bracket when inside the vehicle.
Sudden braking or impact can
propel the Vehicle Charger or radio
with great force and cause serious
injury to occupants of the vehicle.
10