ENGLISH
NOTE: Prior to fitting adapters to stroller frame, engage brake on stroller and remove seat
from frame.
Fitting Adapter To Stroller Frame
To Attach:
1 Insert adapter into housing with the two plastic parts away from handle bar.
Firmly snap in adapter.
To Remove:
2 Push both side buttons and lift adapter from frame.
Fitting Chicco Seat to Adapter
To Attach:
1 Snap in car seat firmly with seat facing the stroller handle bar.
2 Lift up on car seat handle to check attachment.
To Remove:
3 Pull release on back of car seat and lift.
WARNING
FAILURE TO FOLLOW THESE WARNINGS AND
INSTRUCTIONS COULD RESULT IN SERIOUS INJURY
OR DEATH. READ ALL INSTRUCTIONS BEFORE USE:
• Audible "click" must be heard in order to determine that the adapter is locked
into the stroller frame. To ensure proper locking engagement, pull on the adapter
without pressing the release button. It should stay attached to the frame.
• Weight limitations: recommended only for children within the height and weight
limits of models specified in this manual.
• Always use infant car seat restraint system as recommended by manufacturer.
• Intended for use with UPPAbaby VISTA 2015+ and CRUZ strollers only.
Compatible with Chicco Keyfit
®
and Chicco Keyfit 30
US
UPPAbaby, 276 Weymouth Street, Rockland, MA 02370 | uppababy.com | 1.844.823.3132
CANADA
5514 KM Corporation, 201 Wicksteed Avenue, Suite 2, Toronto, ON. M4G 0B1
uppababy.com | 1.844.823.3132
Model 0156 | Version 5
Made in China | Fabricado en China | Fabriquè en Chine
All rights reserved. © 2017 UPPAbaby. UPPAbaby and all associated logos are trademarks.
All product specifications are correct at time of print. 010318
®
Infant Car
Adaptador
Adaptateur
Seat Adapter
para Silla
pour Siège
de Seguridad
Auto de Bébé
for Chicco
®
®
para Chicco
pour Chicco
Compatible with
|
Compatible con
|
Compatible avec:
®
Chicco Keyfit
and Chicco Keyfit 30
For use with
|
Diseñado para
|
Produit conçu pour:
Not compatible with VISTA models 2014 and earlier
®
®