Technical Specifications; Care And Maintenance - Shad BC02 Manual Del Usuario

HUK [OL 3,+ PUKPJH[VY H ILNPUZ [V ÅHZO PU )S\L
Switching off: press and hold the control button (1b) for
a few seconds until the speaker provides an acoustic
ZPNUHS HUK [OL 3,+ PUKPJH[VY H ILNPUZ ÅHZOPUN PU YLK
before the device powers off.
Call functions
When there is an incoming call, the speaker will provide
an acoustic signal.
Answering by pressing the button (1b): press the
control button (1b) only once
Answering through a voice command: answer the call
by speaking any word out loud (e.g. "Answer!")
Ending a call: press the control button (1b) only once or
wait until the other person hangs up
Rejecting an incoming call: press the control button
(1b) twice, as soon as you hear the acoustic signal for
an incoming call
Redialling: press the control button (1b) twice. This de-
WLUKZ VU [OL MLH[\YLZ HUK JVUÄN\YH[PVU VM `V\Y TVIPSL
phone.
Adjusting the volume
The SHAD BC02 device is pre-programmed with a
volume level that allows for optimal listening at speeds
of up to 80 km/h (50 mph). To adjust the volume, use
the volume controls on the connected device.
=VS\TL WLYJLW[PVU TH` ]HY` KLWLUKPUN VU [OL WVZP[PVU
and separation of the speakers from your ears, as
well as the type of helmet and motorcycle, external
conditions and other factors.
Technical Specifications
Bluetooth : 2.1 Class 2
®
7YVÄSLZ! A2DP, HSP, HFP, EDR
Battery: Lithium polymer, allowing for up to 7 hours of
talk time and 200 hours of standby time (depending on
\ZL HUK JVUÄN\YH[PVU VM [OL KL]PJL
Compatible with SHAD BC03 intercom
Ready to operate as an intercom: you can pair your
SHAD BC02 device to a SHAD BC03 and activate the
intercom mode, without losing the hands-free features
for your phone.
Dual link: While connected to a SHAD BC03, if you
receive a call, the intercom function will stop and then
resume when the call ends.

Care and maintenance

The SHAD BC02 device uses components with
the latest technology and is manufactured to high
standards.
To keep your device from inadvertently becoming
damaged, please read the following recommendations
carefully:
‹ +V UV[ H[[LTW[ [V VWLU HU` VM [OL Z`Z[LT
components, since the electronic parts inside it may
become damaged. Do not attempt to open or change
the battery as it may be dangerous.
‹ 2LLW [OL :/(+ )* V\[ VM [OL YLHJO VM JOPSKYLU
‹ 2LLW [OL :/(+ )* PU H KY` WSHJL /\TPKP[` HUK
condensation may damage the electronic circuits.
‹ (]VPK L_WVZPUN [OL KL]PJL [V L_[YLTL [LTWLYH[\YLZ
Intense cold may create condensation inside the
components as these warm up. Extreme heat may
damage the battery, circuits or casings.
‹ +V UV[ KYVW OP[ VY ILUK [OL JVTWVULU[Z HZ [OL
internal circuits may become damaged.
‹ +V UV[ WHPU[ VY KLJVYH[L [OL :/(+ )* HZ [OL
casings may become damaged or impede correct
operation.
‹ +V UV[ \ZL JOLTPJHS WYVK\J[Z ZVS]LU[Z VY KL[LYNLU[Z
to clean the SHAD BC02 as these may damage the
device.
Troubleshooting
If you cannot connect your SHAD BC02 device to your
mobile phone:
‹ 4HRL Z\YL [OL :/(+ )* PZ Z^P[JOLK VU
‹ 4HRL Z\YL `V\Y TVIPSL WOVUL PZ Z^P[JOLK VU HUK
Bluetooth ® has been turned on
‹ 4HRL Z\YL IV[O KL]PJLZ HYL WHPYLK
‹ 4HRL Z\YL [OL :/(+ )* KL]PJL HUK `V\Y TVIPSL
phone are not more than 10 metres (32 ft.) apart
If, after this, you're still not able to pair or use the SHAD
BC02 with your mobile phone, please contact the
retailer where you purchased the product.
Shortcuts
The SHAD BC02 device allows you to receive calls
automatically (as long as this feature is supported by
9