Jensen DMR2116 Manual Del Propietário página 21

Toadjustthebalance:
1. Press the volume knob repeatedly until "BAL" appears on the display panel.
2. Rotate the volume knob to adjust the balance between the left and right
speakers.
Toadjustthefader
1. Press the volume knob repeatedly until "FAD" appears on the display panel.
2. Rotate the volume knob to adjust the balance between the front and rear
speakers.
Loudness Control
Loudness automatically alters the frequency response curve of audio to make it
sound more natural when played at a lower volume level.
1. Press the volume knob repeatedly until "LOUD OFF" appears on the display
panel. This indicates that the loudness function is OFF.
2. Rotate the volume knob to select ON or OFF.
Preset Equalizer Function
The Preset Equalizer function applies a preset sound level to the unit's audio
output signal in accordance to the type of music being played.
Toselectanequalizerpreset:
1. Press the volume knob repeatedly until "EQ" appears in the display panel.
2. Rotate the volume knob to choose the equalizer sound effects. The sequence
of equalizer settings will be as follows:
POP
JAZZ
Turning the Preset Beep Sound On or Off
An audible beep tone confirms each function selection.
1. Press the volume knob repeatedly until "BEEP ON" appears on the display
panel.
2. Rotate the volume knob to select "BEEP OFF" or "BEEP ON".
3. Leave the unit idle for the setting to take effect.
ROCK CLASSIC
OFF
DMR2116
21