Publicidad
Idiomas disponibles
Idiomas disponibles
KNOW YOURPRESSURE W ASHER
Read the Operator'sManual and safety rules before operatingyour pressure washer.
Comparethe illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Savethis manual for future reference.
A - SprayGun-- Controls the application of water onto cleaning
surface with trigger device. Includes trigger lock.
B - PrecisionSpray
TM
Nozzles-- Max, General, Flush, Jet Soap and
Detergent Nozzles:for various cleaning applications.
C - Accessory Tray -- Provides convenient storage for accessories,
such as gun, spray tips, etc.
D - Project Pro@ PerfectMWM Siphon -- Mixes concentrate with
pressure washer spray.
E - BottleBracket-- Cleaning solution bottle fits in wire form
bracket here. Concentrate bottle not included.
F - Oil Fill/Dipstick -- Check, add and drain engine oil here.
G - AutomaticCool Down System-- Cycles water through pump
when water reaches 125°-155°F. Warm water will discharge from
pump onto ground. This system prevents internalpump damage.
H - Pump-- Develops high pressure.
J - DetergentSiphoning Tube/Filter-- Useto siphon pressure washer
safe detergentsintothe low pressurestream.
K - High PressureOutlet-- Connectionfor high pressure hose.
L - Water Inlet -- Connection for garden hose.
M - Air Filter -- Protects engine by filtering dust and debris out of
intake air.
N - Recoil Starter -- Used for starting the engine manually.
P - Fuel Tank-- Filltank with regular unleaded fuel. Always leave
room for fuel expansion.
R - Fold Down Handle-- Handle and accessory tray fold flat atop
cold engine for space-saving storage.
S - Nozzle Extensionwith QuickConnect-- Allows you to switch
betweenfive different PrecisionSpray
TM
nozzles.
T - Hose Wrap and High PressureHose-- Hose wrap provides
easy transport and handling of the high pressure hose. Connect
one end of hoseto water pump and the other end to spray gun.
Items Not Shown:
Fuel Valve -- Usedto turn fuel supply on and off to engine.
EngineSwitch-- Sets engine in starting mode for recoil starter and
stops a running engine.
Choke Rod -- Prepares a cold engine for starting.
Identification Label (near rear of base plate) -- Provides model
and serial number of pressure washer. Pleasehave these readily
available if calling for assistance.
Warning/OperatingInstructions Tag-- Identifies hazardsand proper
procedure to start/stop pressure washer.
Publicidad
