Tabla de contenido
Publicidad
Safety information
It is advisable to wait at least four hours before
•
connecting the appliance to allow the oil to flow back
in the compressor.
Adequate air circulation should be around the
•
appliance, lacking this leads to overheating. To achieve
sufficient ventilation, follow the instructions relevant to
installation.
Wherever possible the spacers of the product should
•
be against a wall to avoid touching or catching warm
parts (compressor, condenser) to prevent possible
burn.
The appliance must not be located close to radiators or
•
cookers.
Make sure that the mains plug is accessible after the
•
installation of the appliance.
Service
Any electrical work required to do the servicing of the
•
appliance should be carried out by a qualified
electrician or competent person.
This product must be serviced by an authorized Service
•
Center, and only genuine spare parts must be used.
Energy saving
Do not put hot food in the appliance;
•
Do not pack food close together as this prevents air
•
circulating;
Make sure food does not touch the back of the
•
compartment(s);
7
Publicidad
Tabla de contenido
