Look GEO TREKKING Manual De Instrucciones página 19

Before fitting your pedals, make sure the crank arms are BSA (9/16x20).
Clean and grease the thread of the crank arm before fitting the pedal.
Locate the left pedal, marked with a circle on the axle (See diagram E). It is screwed on anticlockwise.
The pedals are screwed on using an 8 mm Allen key with 25 N m tightening torque.
E / IDENTIFYING THE RIGHT
AND LEFT PEDALS
OPERATION
The pedals are compatible with single-release cleats and multi-release cleats. Every type of cleat has
different features and operates differently. Therefore, the choice of the type of cleats and the tension of the
springs must be adapted to your habits, power, height and weight.
The table below shows the suitable LOOK cleats for each type of cycling.
X-TRACK single-release
OPTIONAL
X-TRACK EASY multi-directional
SUPPLIED
INSTALLING THE PEDALS ON THE CRANK ARMS
SPD-compatible
30 % easier to
release clip in
EN
C / TIGHTENING THE PEDAL ON THE CRANK ARM
B
PEDAL USAGE
A
SPD-compatible
19
The incorrect cleats and/or
adjustment can lead to the
feet getting accidentally un-
clipped or stuck, which may
cause serious falls or even
death.