Dab Radio - Denver MRD-166 Manual De Instrucciones Y Funcionamiento

57 Tuning/folder down
OPERATING INSTRUCTIONS

DAB radio

Press FM/DAB button to choose DAB Mode
If the system is switched on for the first time, it will automatically enter into the DAB mode
and perform an auto scan function. During the scan the display will show "Scanning ..."
together with a slide bar that indicates the progress of the scan and the amount of stations
that have been found so far. Once the scan has finished, the radio will select the first
alphanumerically found station. You can now press the "PROG"
stations followed by pressing the
Phono Operation
1. Press the volume/power ON/OFF knob to turn the equipment on.
2. Use the function selector to select PHONO mode.
NOTE: Should your record stop before the last track finishes, set the auto stop control to
OFF. Your record will now play to the end, but you will have to stop the turntable rotation
manually. (Return the tone arm to its rest manually and if the turntable is still rotating, switch
off the unit via the volume control knob. Then set the auto stop control back to ON.)
Encoding
1. Set the function button to PHONO, CD, AUX or Cassette mode.
2. Press the record
or SD icon will flash on the LCD display,when set the function button to CD mode.
Press the record
USB or SD icon will flash on the LCD display,when set the function button to
PHONO,AUX or Cassette mode.
3. Press the skip up
or SD) for encoding/recording, then press the record
confirm.
button to select the station of your choice.
REC button one time to read the memory device, then the USB
REC button two times to read the Memory device, then the
or skip down button to select the desired mode (USB
4
button to explore the found

REC button again to