Preparation; Installation Location; Installation - Klarstein Glacial Manual Del Usuario

EN
18

PREPARATION

Open the package
WARNING
Do not give foam and other packaging materials to your children as a
toy, which may cause danger to them.
1. Please remove all packages before power on it, otherwise the machine may not
work properly.
2. Check that the machine is intact.
3. Tear off the tape of the ice shovel.
4. Remove the accessories and check that they are complete (refer to package
contents).

Installation location

• The machine cannot be used outdoors, please use according to the specifi ed water
temperature and ambient temperature range.
• The machine cannot be placed near any heat source.
• The machine should be placed on a stable and horizontal base or ground.
• A minimum distance of 15 cm must be maintained to the left and right sides of
the appliance and to the rear of the appliance in order to ensure suffi cient air
circulation and simplify maintenance of the appliance.
• Do not place anything on top of the ice maker.
Electrical connection
• Only plug the machine into earthed sockets that match the voltage of the machine
(refer to rating plate).
• The fuse current of the electrical box should be greater than 10 A, if it needs to be
repaired, it must be done by a professional.
• If the power cord or plug is damaged, it must be replaced by a service technician
or similarly qualifi ed person.

INSTALLATION

Note: Do not give foam and other packaging materials to your children as a toy,
which may cause danger to them.
• Keep the ice maker in an even location and the power cord can be plugged
directly into the socket.