FOTILE SD2F-P1X Manual De Operación página 8

Ensure the drain hose keeps vertical or horizontal state
A
Kitchen Sink Disposal
1. Correctly install the kitchen Sink Disposal and ensure it's is installed in place, without
leakage.
2. Adjust the water outlet of the kitchen Sink Disposal and tightly connect it with the drain
hose of the sink dishwasher, without leakage.
Note:
If the pipeline needs to be shortened, cut C end
(≤2").
If the pipeline needs to be lengthened, unscrew
the thread of the D end and pull it out, pull-out
distance ≤1".
Ensure the drain hose keeps vertical or horizontal state
B
-12-
(Other pipelines of air gap can be connected at
A. If there is no such requirement, please seal it
or directly use the pipeline without A interface)
C≤2 "
D
Cuttable
Adjustable telescopic tuve
(Flexible to adjust length)
(Air Gap or other pipelines can be connected at
B. If there is no such requirement, please seal it)
Step 10: Check the pipeline
1. Check whether the pipeline connected with the sink has leakage.
2. Check whether the pipeline connected with the functional sink has leakage.
Switch on the power supply, Press the open key to open the door and take out all articles
in the sink.
Press the strength key for a long time to close the valve under the standby (black screen)
mode, fill the overflow opening with water, and check the functional sink and the drain hose
for leaks.
Press the water level key for a long time to open the valve and drain water, and check each
joint of the drain hose for leaks.
Step 11: Final Steps
1. Spray glass cement along the product edge.
2. Place the filter plate assembly together
3. Install the spray arm: Pinch the gray locking tab under the spray arm, place it to the
position shown in the picture and rotate clockwise. After hearing "click" sound,
Spin the spray arm and ensure smooth rotation.
4. Installation Complete
-13-