HAMPTON BAY 52101 Guía De Uso Y Mantenimiento página 7

Assembly - Hanging the Fan
1
Attaching the fan to the
electrical box
NOTE: For better fan performance, make sure the
mounting plate is level. Additional washers (HH) (not
included) may be needed to insert between the outlet box
and mounting plate.
□
Turn the power off.
□
Loosen the two mounting screws (GG) supplied with the
outlet box (FF), but do not remove.
□
Securely attach the mounting plate (A) to the outlet box (FF)
by sliding the mounting plate (A) over the two mounting
screws (GG) supplied with the outlet box. Pull the 120-volt
supply wires through the hole in the mounting plate (A) and
lay them to the side.
□
Securely tighten the two mounting screws (GG).
120V Wires
2
Hanging the fan-motor assembly
□
Carefully lift the fan-motor assembly (C) and engage
the slot in the motor bracket on the top of the fan-
motor assembly (C) with the hook on the mounting
plate (A) so that it is securely suspended. Then
connect the wiring to your fan according to step 3
"Making the Electrical Connections".
FF
GG
HH
A
□
Once the wiring is complete, lift the motor bracket on the
top of the fan-motor assembly (B) so that the four captive
screws (JJ) in the motor bracket align with the four screw
holes in the mounting plate (A).
□
Securely tighten all four screws (JJ).
JJ
7
Please contact 1-855-HD-HAMPTON for further assistance.
A
C
A
C
HAMPTONBAY.COM