Cooling System Cleaning - Kawasaki Engines FX850V - EFI Manual Del Propietário

Cooling System Cleaning

NOTICE
Do not run engine before all cooling system
parts are reinstalled to keep cooling as in-
tended.
Intake Screen
Before each operation, check that the air intake
screen is free from grass and debris. Clean the
screen if necessary.
Cleanout Cover
Every 50 hours of operation, check dust or debris
inside fan housing. To check inside, remove the
cleanout cover and see inside from the inspection
ports of fan housing. Clean or blow the dust if
needed. If it is difficult to clean the dust with the
ports, remove the fan housing and clean the dirt
completely.
NOTE
○
If a torque wrench is not available, this item
should be serviced by an authorized Kawasaki
engine dealer or equally qualified service facility.
•
Loosen the cleanout cover bolt.
•
Pull the cleanout cover outside to clear the tabs.
•
Remove the cleanout cover.
MAINTENANCE 31