Kawasaki Engines FX850V - EFI Manual Del Propietário página 34

32 MAINTENANCE
A. Cleanout Cover Bolt
B. Cleanout Cover
C. Tabs
•
Check the inside from the inspection ports of fan
housing and clean if necessary.
•
Insert the tabs under the fan housing.
A. Inspection Port
B. Tabs
•
Tighten the cleanout cover bolt.
Tightening Torque
Cleanout Cover Bolt:
6.85 N·m (0.699 kgf·m, 61 in·lb)
Cylinder and Cylinder Head Fins
Every 100 hours of operation, check and clean
the cooling fins and the inside of engine shrouds to
remove grass, chaff or dirt clogging the cooling sys-
tem and causing overheating.
NOTE
○
If a torque wrench is not available, this item
should be serviced by an authorized Kawasaki
engine dealer or equally qualified service facility.