Fitting And Removing The Hammock; Adjusting The Angle Of The Hammock; Using The Safety Armrest; Using The Hood - JANE RIDER Instrucciones

E. FITTING AND REMOVING THE HAMMOCK
Your RIDER is fitted with the PRO-FIX system. With this system,
the RIDER hammock can be attached perfectly to the chassis.
What's more, the hammock is reversible so it can be positioned
facing you or facing forwards.
To take the hammock of f, simultaneously pull the unlocking
levers situated on both sides of the hammock.
F . ADJUSTING THE ANGLE OF THE HAMMOCK
You can recline the hammock, to carry the baby in the most
comfortable position at all times.
To lower the backrest take hold of the strap found on the back,
with the red logo, and pull it downwards to the required posi-
10
tion.
.a
To raise the backrest pull the strap with the black logo upwards.
10
.b
! WARNING: Only use the pushchair when the green dot is dis-
played. Positions P1 and P2 simply make folding easier and,
together with position 11, must never be used with your baby
in the pushchair
28 EN
8 8
- .a
9
. 11
G. USING THE SAFETY ARMREST
The safety armrest is designed to slot into casing on the seat. If
you want you can release just one side of the armrest by simply
pressing the side buttons and the armrest will be fully hinged by
12 12
the other side.
- .a
!
WARNING: The child should be kept away from the mo-
bile parts when the responsible adult is handling the-
se. The appearance of cutting, compression and pinch
points are inevitable during these operations.
! WARNING: Never hold the pram or the hammock by the
protection bar, it is not a carrying handle.
H. USING THE HOOD
To fasten the hood onto the frame of the hammock, slide it from
the top down to the corresponding slots on the central part. Use
the zip on the hood to attach it to the frame.
Follow the same steps in reverse order to take the hood off.
13 13
- .a