Changing Channels; Adjusting The Volume; Selecting The Video Source; Memorizing Receivable Channels - Insignia NS-PDP50HD-09 Guia Del Usuario

2 To turn off your TV, press
goes to Standby mode and the
Power/Standby indicator turns red.
Note
If you are going to be away for an extended time,
disconnect the power cord from the power outlet.

Changing channels

To change channels:
• Press CH or
on the remote control.
To enter a channel number directly:
• Press the number buttons on the remote
control.
In digital TV mode, a main (major) channel
can have one or more sub (minor) channels.
Press the number buttons to enter the main
channel, press the • button (to the left of the 0
button), then press the number button for the
sub-channel. For example, if you want to
watch channel 5.2, press 5, press the •
button, then press 2.
To go to the previous channel:
• Press RECALL.

Adjusting the volume

You can adjust the volume using the controls on
your TV's side panel or the remote control.
To adjust the volume:
1 Press VOL+ or VOL- to increase or decrease
the volume.
2 Press MUTE to mute the sound. To restore
the sound, press this button again, or the
VOL+ or VOL-.

Selecting the video source

To select the video source for your TV:
1 Press INPUT to display the Input Source List .
2 Press or
(initially select TV), then press ENTER.

Memorizing receivable channels

Channel scan creates a list of receivable
channels for the current input (antenna or cable).
You need to run channel scan for each RF input
to create a list of available channels from both
inputs.
To scan for receivable channels:
1 Press MENU. The Main menu opens.
Picture Mode
Brightness
Contrast
Saturation
Hue
Sharpness
Color Temperature
Noise Reduction
16
(power). The TV
on the front of your TV or
to select the source you want
Video
User
54
50
54
0
5
Medium
Exit
Enter Select
www.insignia-products.com
Insignia NS-PDP50HD-09 50" PDP TV
2 Press or
The TV Menu opens.
3 Press to select Channel Scan, then press
ENTER.
Channel Scan automatically creates a list of
receivable channels. Press MENU at any
time to interrupt the memorization process
(the list will not be created if the scan is
interrupted).
4 Press ENTER to display the received
channel list, then press
channel.
5 Press ENTER to show the channel detail
information.
For digital main channels, which might
include many subchannels (for example 9-1
or 9-2) that show programs at the same time,
press with 0-9 buttons to select digital
channel (for example, 9.1).

Selecting the aspect ratio

The Wide Screen feature lets you view 4:3 or
16:9 images in wide screen mode. Press ZOOM
repeatedly to cycle through the available screen
formats.
NORMAL—Displays at 4:3 aspect ratio. Content
with 4:3 aspect ratio is centered on screen with
black bars on right and left.
Note
NORMAL is not available when you are watching a
720p, 1080i, or 1080p source.
to select the TV menu icon.
or to select a