Complete The Installation; Care And Cleaning - Kohler K-20701-NY Guía De Instalación Y Cuidado

6. Complete the Installation

IMPORTANT! Kohler Co. strongly recommends the use of 100%
silicone sealant as instructed in this installation guide. Other sealants
may shrink, separate, and peel over time.
Complete the drain installation according to the instructions
included with the drain cap.
Connect and tighten the trapway to the drain.
Run water into the sink and check the connections for leaks.
NOTICE: Make sure that the silicone sealant bead fills the entire
seam around the pedestal base and finished floor.
Apply a continuous bead of clear, 100% silicone sealant to the
seam between the pedestal and the floor.

Care and Cleaning

For best results, keep the following in mind when caring for your
KOHLER product:
• Always test your cleaning solution on an inconspicuous area
before applying to the entire surface.
• Wipe surfaces clean and rinse completely with water immediately
after applying cleaner. Rinse and dry any overspray that lands on
nearby surfaces.
• Do not allow cleaners to soak on surfaces.
Kohler Co.
100% Silicone
Sealant
11 1322338-2-A