JBL TempSet angle Indicaciones Para El Montaje página 9

the other hand to prevent it from twisting.
7. Now, you can connect the mains lead to the power supply and use the switch to turn the
light on as needed. A standard automatic timer can be used instead. In this case, the timer
should always be set to „on".
Safety precautions:
• Make sure that the operating voltage indicated on the name-plate agrees with the mains
voltage.
• Always disconnect the power plug and allow the socket to cool off first before changing
bulbs. Screw in the new bulb and then reconnect the power plug.
• When screwing the bulb in and out, always make sure to hold the socket with one hand in
order to prevent the cable from twisting.
• Damaged leads must be replaced by a trained specialist. Make sure to only use Type
H03VVH2-F 2 x 0.75 mm2 leads.
• The light socket is a special socket and may not be replaced by a standard socket. Please
contact the manufacturer in the event of a damaged socket.
• The device may only be operated indoors.
• The device may not be used for any purpose besides the purpose indicated in the Instruc-
tions for Use.
• Children should be supervised in order to make sure that they do not play with the device.
• This appliance is not intended to be used by persons (including children) with reduced
physical, sensory or mental capabilities or a lack of experience and/or know-how, unless
they are supervised by or receive instructions in the use of the appliance from a person
responsible for their safety.
• Never spray the TempSet kit or mounted lamps with water.
UK