Forch 5352 2200 Manual De Instrucciones página 27

8. Short-term and long-term storage
The device must be stored under the following conditions:
■ Store the device in a dry and dust-free area.
■
Do not expose the tool to liquids and/or aggressive substances.
■
Do not store unit outdoors.
■ Keep device away from children.
■
Storage temperature -10°C up to +40°C.
■
Relative humidity max. 60%.
9. Dangers emanating from the device
Before each use this FÖRCH-tool has to be examined for full functionality. In case the
functional capability cannot be guaranteed as a result of this examination or if damages
are found, the tool must not be used. If full operability is not given and the tool is still used,
there is a risk of significant physical, health or property damages.
■
Do not use devices when the On/Off switch is defective. Devices that can no longer be
switched on/off with their switch are dangerous and have to be repaired.
■ All service and repair work has to be carried out by qualified personnel. In order to en-
sure operational safety in the long run, only original spare parts must be used.
■
Protectors and/or housing elements must not be removed.
■
Never operate the tool when a protective cover is missing or in case some of the protec-
tive elements are missing or aren't in perfect condition.
■
Modifications on FÖRCH-tools are prohibited due to safety reasons. Any modification of
the original device leads to immediate exclusion of any liability.
■ Wear safety gloves and goggles.
■ Tools with pneumatic drive might disperse chips, dust and other abrasive
particles at high speed which may lead to severe eye injuries. Compressed
air might be dangerous. The airflow could cause damage to sensitive body
parts like eyes, ears, etc.. Objects and dust swirled by the airflow could
cause injuries.
■ Wear ear protection.
■ Long exposure to the operating noise of a pneumatic tool can lead to
permanent hearing loss.
■ Wear facial and respiratory protection.
■ Some material like adhesives or tar contain chemicals whose vapours
inhaled over a longer period of time, can cause severe damage.
■ Wear tight protective clothing.
■ Tools with moving parts can be caught in hair, clothing, jewellery or other
loose objects which might result in severe injuries. Never wear too loose
clothes and/or such with straps or loops etc. which might be caught in
moving parts of the device. Do not wear jewellery, watches, identification
tags, bracelets, necklaces etc. which might be caught in the tool.
■
Never touch tool parts that are in motion. Long hair should be held together or covered.
■ Pneumatic tools must be kept away from children. Unattended tools or such connected
to compressed air could be used by unauthorised persons and thus lead to their injury or
cause injuries to third persons.