Print Troubleshooting - Lexmark 22W0020 Manual De Instrucciones

All manuals and user guides at all-guides.com
Cannot print from a digital camera using PictBridge
Solution 1
Enable PictBridge printing on the camera by selecting the correct USB mode. For more
information, see the digital camera documentation.
Solution 2
1
Disconnect the camera.
2
Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera
documentation to determine whether it is PictBridge-enabled.
Solution 3
Use only the USB cable that came with the camera.

Print troubleshooting

Improving print quality
If you are not satisfied with the print quality of a photo, make sure you:
•
Use the appropriate paper for the photo. For best results, use Lexmark Perfectfinish Photo
Paper or Lexmark Photo Paper.
Note: Do not use Lexmark Premium Photo Paper. Your print cartridge is not compatible
with this type of paper.
•
Load the paper with the glossy or printable side facing you. (If you are not sure which side
is the printable side, see the instructions that came with the paper.)
•
Select Photo as the print quality.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers
or sharp objects. For best results, remove each printed sheet individually from the paper exit
tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing.
If the photo still does not have the print quality you want, follow these steps:
1
Align the print cartridge. For more information, see "Aligning the print cartridge for better
print quality" on page 9.
If print quality has not improved, continue to step 2.
2
Clean the print cartridge nozzles. For more information, see "Cleaning the print cartridge
nozzles" in the "Maintaining the printer" chapter of the User's Guide on the CD.
If print quality has not improved, continue to step 3.
45