Users should ensure for their own protection that the electrical ground connections of the power utility,
telephone lines and internal metallic water pipe system, if present, are connected together. This precaution
might be particularly important in rural areas.
NOTE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of
the maximum number of terminals allowed to be connected to a telephone interface. The termination on an
interface might consist of any combination of devices subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does not exceed 5.
The REN for this product is 0.1, based on FCC Part 68 test results.
Aviso para los usuarios de la red telefónica alemana
Hinweis für Benutzer des deutschen Telefonnetzwerks
Dieses HP-Fax ist nur für den Anschluss eines analogen Public Switched Telephone Network (PSTN) gedacht.
Schließen Sie den TAE N-Telefonstecker, der im Lieferumfang des HP All-in-One enthalten ist, an die
Wandsteckdose (TAE 6) Code N an. Dieses HP-Fax kann als einzelnes Gerät und/oder in Verbindung (mit
seriellem Anschluss) mit anderen zugelassenen Endgeräten verwendet werden.
Declaración sobre fax por cable de Australia
In Australia, the HP device must be connected to Telecommunication Network through a line cord which meets
the requirements of the Technical Standard AS/ACIF S008.
Información regulatoria para productos inalámbricos
Esta sección contiene la siguiente información regulatoria sobre productos inalámbricos:
Exposición a emisiones de radiofrecuencia
●
Aviso para los usuarios de Canadá (5 GHz)
●
Aviso para los usuarios de Taiwán (5 GHz)
●
Aviso para los usuarios en Serbia (5 GHz)
●
Aviso para los usuarios de Tailandia (5 GHz)
●
Aviso aos usuários no Brasil
●
Aviso para los usuarios de Canadá
●
Aviso para los usuarios de Taiwán
●
Aviso para usuarios en México
●
Aviso para los usuarios en Japón
●
Exposición a emisiones de radiofrecuencia
CAUTION: The radiated output power of this device is far below the FCC radio frequency exposure limits.
Nevertheless, the device shall be used in such a manner that the potential for human contact during normal
operation is minimized. This product and any attached external antenna, if supported, shall be placed in such
a manner to minimize the potential for human contact during normal operation. In order to avoid the
possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be
less than 20 cm (8 inches) during normal operation.
192 Apéndice A Información técnica
ESWW