Setting The Pressure; Setting The Timer - Gima MAYLEA Instrucciones De Uso

Setting the pressure

Pressure range: 10~180mmHg (increases: 10mmHg).
We recommend you to set the pressure below 80mmHg.
You can find out the applied pressure value by multiplying the value on the display by 10.
Example: when on the display appears 11, the applied pressure is 11 x10 = 110mmHg.
To decrease the pressure
turn the pressure knob to
left.
The set pressure value can
be viewed on the LCD
display
If you consider that there is not enough pressure inside the unit, check for any air losses from the leg
or arm cuff.
In case of air loss due to a hole, the pressure sensor detects the outflow and after
15/20 seconds it automatically passes to the next chamber.

Setting the timer

To decrease the usage
time press the key
The timer can be set to the values below: 10, 20, 30, 40 minutes
To increase the pressure
turn the pressure dial to the
right.
The set pressure value can
be viewed on the LCD
display.
(Max. 180mmHg)
To increase the usage time
press the key
10