Troubleshooting - Gima MAYLEA Instrucciones De Uso

7

Troubleshooting

Operating conditions
Lack of power supply
The device is switched on
but not running
Excessive noise during
operation
The air does not come out
from the hose
It remains blocked on
a single phase for 20
seconds while inflating
Checks to be carried out
Check that the supply plug is correctly
connected to the wall outlet.
Make sure that the system supply voltage is suitable for
the device.
Check the fuse.
Disconnect the plug and re-connect it to the power
socket.
Make sure that the device is placed horizontally.
Remove any materials leaning on the device.
Check for any foreign objects or excess dust
inside the device.
Make sure that the hose is not bent.
Make sure that the connector is
properly inserted.
Make sure that the leg/arm cuff is not punctured and that
there are no air losses.
In this case the pressure sensor detects the air
loss in the leg/arm cuff section and after 20
seconds it automatically passes to the next
phase.
16