Troubleshooting - Optika Italy CL Serie Manual De Instrucciones

11. Maintenance
Device environment
This device is recommended to be used in a clean, dry and shock free environment with a temperature of 5°-
40°C and a maximum relative humidity of 85 % (non condensing). Use a dehumidifier if needed.
To think about when and after using the device
• Never mishandle or impose unnecessary force on the system.
• Never attempt to service the system yourself.
Electrical safety precautions
• Before plugging in the power supply, make sure that the supplying voltage of your region
matches with the operation voltage of the equipment and that the lamp switch is in off-
position.
• Users should observe all safety regulations of the region.
• The equipment has acquired the CE safety label. However, users do have full responsibility
to use this equipment safely.
If you need to send the system to Optika for maintenance, please use the original packaging.

12. Troubleshooting

Review the information in the table below to troubleshoot operating problems.
PROBLEM
The LED light does not operate
CAUSE
Battery is uncharged
Page 12
SOLUTION
Recharge battery to full charge