Troubleshooting; Causes Of Malfunction And Fault Rectification - Silvercrest SLE 200 A1 Instrucciones De Uso

Troubleshooting

This section contains important information on fault identification and rectifica-
tion.
Causes of malfunction and fault rectification
The following table will help you identify and rectify minor malfunctions:
Fault Possible cause
The mains plug is not plugged in.
The appliance
will not switch
The mains socket is not supplying
on.
any power.
The appliance
stops occa-
The humidity of the room has
sionally (the
reached the desired level.
fan switches
off).
The ventilation openings are
dirty or covered.
The appliance
is producing The room's windows and doors
no or too little are open.
condensate.
The appliance is running in the
FAN programme. Dehumidifica-
tion is not taking place.
The ejected air
Heat exchange process
is warm.
appears
Temperature sensor/humidity
on the dis-
sensor error
play w.
The water tank 6 is full.
appears
on the dis-
The water tank 6 is not inserted
play w.
properly.
NOTE
► If the above-mentioned solutions do not resolve the problem, please contact
Customer Service (see section Service).
■ 18 │ GB │ IE
Remedy
Insert the plug into the mains power
socket.
Check the house mains fuse.
This is a normal feature of the
appliance.
Ensure that the air inlet and air
outlet openings are clean and
free of obstructions.
Close the windows and doors.
Select the DEHUMIDIFICATION
programme.
This is a normal feature of the
appliance.
Contact the Customer Service
department.
Empty the water tank 6.
Insert the water tank 6 into the
appliance correctly.
SLE 200 A1