Task 5: Installing Software Drivers - Promise Technology SUPER TRAK TX8650 Guia De Inicio Rapido

14. Highlight Save Configuration and press Enter.
The Logical Drive Management screen appears with your new logical drive.
At this point you can create additional logical drives, if there is physical drive
space available. To create another logical drive, repeat steps 8 through 14
above.
15. Press the F10 key to exit the SuperBuild utility and press Y to confirm and
restart the computer.
Do not press the Ctrl-Alt-Del keys. Do not press the Esc key.
You have successfully created a new RAID logical drive.

Task 5: Installing Software Drivers

Drivers for Windows and some Linux operating systems are included on the
Software CD that came with your SuperTrak TX Controller card. Please
download the latest drivers from the Promise
See Chapter 3 of the SuperTrak User Manual on the Software CD for step-by-
step instructions for driver installation.
You must be partition and format your new logical drive before you
can use it. Use the same method of partitioning and formatting a
logical drive as you would any other fixed disk added to your
computer system.
SuperTrak Installation Task List
Important
support website.
13