SuperTrak TX Quick Start Guide
To install only the CLI, uncheck the Agent Feature and Server Feature boxes on
the Select Features dialog box during installation. See Chapter 2 of the
SuperTrak User Manual on the Software CD for more information.
To install WebPAM PRO onto your Windows-based PC or Server:
1.
Boot the PC or server, launch Windows, and log in as the Administrator.
If the computer is already running, exit all programs. If you are not logged in
as the Administrator, log out, then log in again as the Administrator.
2.
Insert the Software CD into your CD-ROM drive.
The installer window opens automatically.
3.
Click the WebPAM PRO Software button, then click the Install WebPAM
PRO for Windows button.
The first WebPAM PRO installation dialog box appears.
4.
In the Introduction dialog box, click the Next button to proceed with
installation.
5.
Follow the prompts in the installation dialog box.
Installing WebPAM PRO onto Linux
Follow these steps to install WebPAM PRO onto your Linux-based PC or Server:
1.
Boot the PC or server, log in as root, and launch the Linux GUI.
If the computer is already running, exit all programs. If you are not logged in
as root, log out, then log in again as root.
2.
Insert the Software CD into your CD-ROM drive.
3.
Go to the WebPAM PRO / Linux directory on the CD-ROM and copy the
WebPAMPRO...Linux.bin file to the root directory.
4.
Open a terminal window and type sh followed by the exact name of the
./WebPAMPRO...Linux.bin file, then press Enter.
After several moments, the first WebPAM PRO installation dialog box
appears.
5.
Follow the prompts in the installation dialog box.
Check the Read Me file for any issues pertaining to the flavor and
version of Linux OS that you are running.
Important
16