Stopping The Engine; Using The Self-Propel Drive - Toro 20333 Manual Del Operador

pull it sharply (Figure 12). Allow the rope to return
to the handle slowly.
Note: If the mower does not start after several
attempts, contact an Authorized Service Dealer.

Using the Self-propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the mower will automatically keep pace with
you (Figure 13).
Note: If the mower does not freely roll backward
after self-propelling, stop walking, hold your hands in
place, and allow the mower to roll a couple of inches
(centimeters) forward to disengage the wheel drive. You
can also try reaching just under the personal pace handle
to the metal handle and push the mower forward a
couple of inches (centimeters). If the mower still does
not roll backward easily, contact an Authorized Service
Dealer.
Figure 12
Figure 13

Stopping the Engine

Push the ignition toggle switch to the Stop position
(Figure 14).
1. Ignition toggle switch
Engaging the Blade
When you start your engine, the blade does not turn.
You must engage the blade to mow.
1. Pull the control bar lock back (Figure 15).
2. Pull the blade control bar to the handle (Figure 16).
3. Hold the blade control bar against the handle
(Figure 17).
8
Figure 14
Figure 15
Figure 16