Setting Of The Cars´ Basic Speed; Setting Fuel Tank Capacity; Setting Of Cars´ Braking Performance; Extended Pit Lane Function - Carrera DIGITAL 124 Instrucciones De Uso Y Montaje
Ocultar thumbs
Ver también para DIGITAL 124:
- Instrucciones de uso y montaje (101 páginas) ,
- Instrucciones de uso (77 páginas) ,
- Manual de instrucciones (2 páginas)
Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Setting of the
cars´ basic speed
1 – 10
1
3
2
1
5
7
8
4
3
The setting of the basic speed can be eff ected individually for one
and/or several cars. The cars which are to be adjusted have to be
5
6
positioned on the track. The setting can be carried out on 10 levels
with the 5 LEDs indicating the diff erent levels by fl ashing or perma-
nent lighting.
1 LED lights = low speed
1
5 LEDs light = high speed
2
Switch on the Control Unit, place the cars to be adjusted on the
track and press "SPEED"
5
once. A certain number of LEDs will
now light, showing the speed level last used. Push the "SPEED"
button
5
as many times until you have reached the speed desired.
Confi rm by pressing "ENTER/START"
the lighting of the middle LED confi rms completion of the setting,
fi g.
.
6
Setting of cars´
braking performance
1 – 10
1
3
2
1
5
5
7
8
4
3
(only for cars operated with speed controllers)
The setting of the braking performance can be eff ected individually
5
6
for one and/or several cars. The cars which are to be adjusted have
to be positioned on the track. The setting can be carried out on 10
levels with the 5 LEDs indicating the diff erent levels by fl ashing or
permanent lighting.
1 LED lights = low braking eff ect
1
5 LEDs light = high braking eff ect
2
Switch on the Control Unit, place the cars to be adjusted on the
track and press "BRAKE"
6
once. A certain number of LEDs will
now light, showing the brake step last used. Push the "BRAKE" but-
ton
6
as many times until you have reached the braking perform-
ance desired. Confi rm by pressing "ENTER/START"
running light and the lighting of the middle LED confi rms completion
of the setting, fi g.
.
6
10
Setting fuel tank capacity
1 – 10
2
1
3
4
3
5
6
4
3
6
5
5
6
2
1
4
(only for cars operated with speed controllers)
The setting of the fuel tank capacity in combination with the Pit Lane
7
8
5
(20030356) is eff ected for all cars simultaneously. The setting can
be carried out on 10 levels with the 5 LEDs indicating the diff erent
levels by fl ashing or permanent lighting.
1 LED lights = low fuel capacity
1
5 LEDs light = full tank
2
Switch on the Control Unit, place the cars to be adjusted on the
track and activate the fuelling function by means of the slide switch
2
, fi g.
LEDs will now light, showing the fuel capacity last used. Push the
3
. A short running light and
"FUEL" button
capacity desired. Confi rm by pressing "ENTER/START"
running light and the lighting of the middle LED confi rms completion
of the setting, fi g
Extended fuelling function
You can choose between 3 modes via the sliding switch
fi g.
:
3
• OFF = cars don´t consume any "petrol"
• ON = cars consume "petrol"
• REAL = maximum speed depending on fuel tank capacity / cars
1 – 10
2
consume "petrol") (only in combination with Pit Lane 20030356 or
Pit Stop Lane 20030346 and Pit Stop Adapter Unit 20030361)
When driving in "REAL-mode" the car with a full tank is "heavier",
drives slowlier and shows a lower braking eff ect; a car with an empty
tank is "lighter", drives faster and shows a higher braking eff ect. The
3
current fuel tank capacity and the "fuel consumption" can only be
displayed in combination with the Driver Display 20030353 and Pit
2
4
Stop 20030356.
Refuelling of cars with Pit Lane 20030356
and Driver Display 20030353
6
7
Pit Lane 20030356
6
2
1
7
7
8
9
3
. A short
The car´s present tank capacity can be read via the bar display with
5 green and 2 red LEDs at the Driver Display. For refuelling drive
your car into the Pit Lane across the refuelling sensor fi g.
bar display now starts to fl ash, fi g.
by keeping the lane-change button pushed. fi g.
refuellings are indicated by fl ashing or lighting of the yellow LEDs,
fi g.
(also see Driver Display).
10
Note: cars with an empty tank are disregarded for lap-counting
in combination with Position Tower 20030357.
1 – 10
1 – 10
2
2
3
1
4
7
8
5
6
7
2
1
6
7
8
3
2
6
7
7
3
. Press the "FUEL" button
once. A certain number of
7
as many times until you have reached the fuel
.
6
4
3
5
6
4
3
5
6
1
8
Driver Display 20030353
8
4
3
10
5
6
4
3
5
6
8
, and the car can be refuelled
. The number of
9
Setting of tank capacity at the start of the race
Pit Lane 20030356
11
2
1
4
3
8
13
5
6
(only in combination with Pit Lane 20030356 and Driver Display
1
20030353)
Irrespective of the basic setting of the tank capacity it is possible
to individually set the tank capacity for one or several cars at the
race´s start for the number of laps till the fi rst pit stop. Push "START/
8
ENTER" once
3
; the 5 LEDs at the Control Unit will light perma-
nently, fi g.
, and the Driver Display´s bar display will fl ash, fi g.
12
Clicking the lane-change button at the corresponding speed control-
ler enables you to change the fi ll level, fi g.
Deactivating Settings Keys
4
3
1
3
. A short
5
6
2
1
2
,
3
7
8
2
1
To deactivate the keys for setting Speed, Brake and Fuel, proceed
as follows: Hold down the Code Key:
7
8
While holding down the Code Key
then release the Code Key. To reactivate the above keys, repeat the
procedure just described.
Extended Pit Lane function
Pit Lane 20030356
1
2
1
3
7
8
2
1
5
. The
7
7
8
(only in combination with Pit Lane 20030356)
It is possible to activate/deactivate the lap counting function in the Pit
Lane 20030356 or Pit Stop Lane 20030346 with the Pit Stop Adapter
Unit 20030361. Switch off the Control Unit, keep "SPEED" button
Driver Display 20030353
12
2
1
14
7
8
.
13
.
14
2
7
8
8
, turn on the Control Unit and
3
2
5
6
3
4
5
6
6
4
3
5
6
7
5
)
2
Publicidad
Capítulos
Tabla de contenido
