Trueshopping CT1AMBCM Guia Del Usuario página 3

SAFETY PRECAUTIONS FOR USING THE CHARGER
1) Do NOT place the charger in the engine compartment or near moving parts or near the
battery; place as far away from them as DC cable permits. NEVER place a charger directly
above a battery being charged; gases or fluids from battery will corrode and damage
charger.
2) Do NOT cover the charger while charging.
3) Do NOT expose to rain or wet conditions.
4) Connect and disconnect DC output only after setting AC cord from electric outlet.
5) Use of an attachment not recommended or sold by the manufacturer may result in a risk
of fire, electric shock or injury to persons.
6) Do not overcharge batteries by selecting the wrong charge mode.
7) To reduce the risk of damage to electric plug and cord, pull by the plug rather than the
cord when disconnecting charger.
8) To reduce risk of electric shock, unplug charger from outlet before attempting any
maintenance or cleaning.
9) Operate with caution if the charger has received direct hit of force or been dropped. Have
it checked and repaired if damaged.
10) Any repair must be carried out by the manufacturer or an authorized repair agent in order
to avoid danger.
ABOUT CT1AMBCM
1) The CT1AMBCM is perfect for keeping all of your 12V and 6V lead-acid batteries in top
condition, including WET (Flooded), GEL, MF (Maintenance-Free), EFB (Enhanced
Flooded Battery) and AGM (Absorbed Glass Mat) batteries.
2) Built-in intelligent microprocessor makes charging and maintaining faster, easier and
safer.
3) This charger has safety features, including spark proof, protection for reverse polarity,
short circuit, overcurrent and overcharge.
4) It has auto-memory, which returns to last selected mode when restarted.
5) When Emerald Green LED is flashing, the charger is in bulk charge at a constant 750mA
rated current output. When Emerald Green LED turns to solid, the battery is fully charged.