AOSmith AO-US-RO-4000 Manual Del Propietário página 8

STEP 4 Install Water Storage Tank
1. Wrap plumber's tape (K) 5 times around
nipple on top of water storage tank (wrap in
same direction as threads - clockwise).
2. Hand-tighten tank connector (J) onto tank
nipple until secure.
Note: Do not cross-thread or over-tighten.
3. Use mount stand to place water storage tank near system manifold.
Use remaining 3/8" white tubing saved from Step 3 and connect one end
to the tank.
Push tubing into
connector through
nut, collar and sleeve.
4. Connect other end of tubing to port labeled "TANK" on system manifold.
Unscrew compression
nut from tank connector
to ensure tubing is
connected through
collar and sleeve.
NEED HELP? GIVE US A CALL 877.333.7108
INSTALLATION GUIDE
Slide nut to threads and
tighten with a wrench.
Note: Do not over-tighten.
FAUCET TANK
System Manifold side view
5