ANSMANN APS Serie Manual Del Usuario página 7

Do not open the device!
Do not use the product permanently with a
travel adapter.
The product is categorised as protective
class II. It has enhanced insulation and
for this reason requires no protective earth.
Do not use the product in the vicinity of com-
bustible liquids or gases.
Do not use the product in the vicinity of heat
sources such as radiators or other devices
that give off heat.
Do not cover the product.
Do not leave the product unattended during
use.
Use the product only in dry indoor rooms
and protect it from moisture.
PRODUCT DESCRIPTION (SEE ILLUSTRATION)
1 Polarity changer
2 Key for voltage selection switch
3 Voltage selection switch
Deutsch | English | Français | Español | Português | Svenska
Italiano | Nederlands | Dansk | Suomi | Norsk
12
FUNCTIONAL OVERVIEW
Universal mains adapter with adjustable output voltage
Incl. assorted output plugs for numerous applications
Voltage stabilised
Short-circuit proof
Low standby current consumption
Polarity of the output plug can be changed
Worldwide use
OPERATION
1. CHECKING THE CURRENT:
Ensure that your consumer does not require more current (mA) than the mains power unit
can deliver (refer to the instructions or type plate on the consumer or its original mains
power unit).
CAUTION: The mains power unit could be destroyed if overloaded.
2. SELECTION OF THE CORRECT OUTPUT PLUG:
A number of common output plugs are included. Select the correct plug for your applica-
tion. The plug must fit snugly in the device to be operated but must not jam.
CAUTION: Please do not use force.
3. POLARITY OF THE CONSUMER DEVICE:
Check the polarity required by the consumer device and set this polarity with the help of
the polarity changer [1] in the output cable of the mains power unit.
CAUTION: Incorrect polarity can destroy the consumer device, so it is essential that the
correct polarity is not established by 'trial and error'!
4. ADJUSTING THE VOLTAGE / FIRST USE:
Check the input voltage (cited in V DC) required by your device. Set this voltage on the
mains power unit with the help of the key [2] on the rotary switch [3] and connect the
mains power unit with the mains power supply once the consumer has been connected.
CARE AND MAINTENANCE
Cleaning
Disconnect the power supply from the product before any cleaning. Use only a soft, dry or
slightly moist cloth (with a little mild washing-up liquid if required). Do not use abrasive
agents or solvents for cleaning.
Deutsch | English | Français | Español | Português | Svenska
Italiano | Nederlands | Dansk | Suomi | Norsk
13