auna Roadie 2K Manual De Instrucciones página 38

EN
DAB INFO modes
Press the INFO button, the display will switch through the following display
modes. The information of each display mode is displayed on the lower
segment of the display.
Signal strength
The display will show a slide bar to indicate the signal strength, the stronger
the signal, the longer the bar will be from left to right.
Programme type
This describes the "style" or "genre" of the programme that is being
broadcast.
Ensemble
This displays the name of the multiplex that contains the station you are
listening to. A multiplex is a collection of radio stations that are bundled
and transmitted on one frequency. There are national and local multiplexes.
Local ones contain stations that are specific to that area.
NOTE
DAB – unlike normal radio, groups together several radio stations and
transmits them on one frequency.
Frequency
This displays the frequency of the present station, such as "11C 220.352
MHz".
Signal Error
This displays a number showing the error rate. If the number is 0, it means
the signal received is error free and the signal strength is strong. If the error
rate is high, it is recommended to re-orient the aerial or re-position the unit.
Audio Bit Rate
The display will show the digital audio bit rate being received.
DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message that the broadcaster may
include with their transmissions. The message usually includes information,
such as program me details etc.
38