Fm Operation - auna Roadie 2K Manual De Instrucciones

FM OPERATION

SWITCHING FROM DAB TO FM MODE
To switch the unit to FM mode, press the SOURCE button repeatedly to
select FM mode. The display will show the frequency.
Auto scan
Press the SCAN/ / button until the tuner starts searching for a station. To
scan down the frequency band, press and hold the SCAN / button. Once
a station has been found, the scanning will stop automatically.
Manual Scan
To search for FM stations manually, press the  or  ,buttons repeatedly
until your desired frequency is reached.
Scan setting
This is a scanning option to scan all stations, or just scan stations with a
strong signal.
1. Press the MENU button, then press the  or  buttons to select "Scan
setting". Press the ENTER button to confirm.
2. Press the  or  buttons to select "All stations" or "Strong stations
only". Press the ENTER button to confirm.
Audio setting
This unit will automatically switch between stereo and mono mode, but
you can override this and switch this function manually. This can be helpful
when receiving poor signal reception.
1. Press and hold the MENU button to display the menu. Then press the
buttons to select "Audio". Press the SELECT button to confirm.
2. Press the buttons to select "Stereo" or "mono" and then press the
SELECT button to confirm.
FM display modes
Press the INFO button. The display will switch through the following display
modes. The information of each display mode is displayed on the lower
segment of the display.
Radio text
As with DAB, the broadcaster can include a scrolling text that displays
information about the current program.
EN
39