Alesis TWOTRACK Guia De Inicio Rapido página 5

Recording
1. After setting the recording options, from the Home screen press the
[RECORD] button to begin recording.
2. During recording, you can use the [MIC+] and [MIC-] buttons to adjust the
input signal level of the microphones and use the [VOL+] [VOL-] buttons
to adjust the output signal level of the headphone jack.
Note: If you are connected to the Mic/Line In jack, the internal mics will
be disabled.
3. During the recording, use the [FOLDER] button to turn Auto Gain ON or
OFF (Default).
4. Press the [PLAY] button to pause recording (the RECORD LED will
flash). Press the [PLAY] button again to continue recording on the same
track.
5. During recording, press the [STOP] button to stop recording and save the
audio file on the micro SD card or flash.
Note: The max recording size per file is up to 2 GB. Do not remove the card
during recording. When a slow micro SD card is detected the UI will display,
"SLOW CARD METER OFF" and the input metering will be disabled. You can
still record with this card, but will lose the metering functionality.
Playback
1. From the Home screen, press the [PLAY] button to start playing the
selected file. Playback will continue until all files in the current folder are
finished playing.
2. During playback, press the [FORWARD] button to start playing the next file
and press the [BACK] button to start playing the previous file in the current
folder.
3. During playback, press and hold the [BACK] button to search through a
song in reverse or press and hold
the [FORWARD] button to fast forward through the song.
4. Press the [PLAY] button to pause at the current position during playback.
5. When paused, press the [PLAY] button again to continue playback.
6. Press the [STOP] button to stop playing.
7. During playback, use the [VOL+] and [VOL-] buttons to adjust the output
signal level of the headphone jack.
File List
1. Press and hold the [MENU] button to enter the File List menu. Press
[MENU] again to exit.
2. Use the [PLAY] or [STOP] buttons to highlight a file and press the [REC]
button to set it to be the current file.
3. Hold the [PLAY] or [STOP] buttons to search through the list quickly.
Note: During recording or playback, you cannot enter File List mode. From the
File List screen, you cannot immediately play the selected file.
5