5- Protector; 6- Adjusting The Backrest; 7- Removing The Rear Wheels; 8- Adjusting The Suspension - JANE POWERTWIN Instrucciones

5- PROTECTOR

• To remove the protector, pull it while pressing the two
buttons at the same time. 13

6- ADJUSTING THE BACKREST

• You can adjust the front backrest by pulling the handle
and moving it to the required position.
• WARNING: The children may slip if the crotch strap is
open, with the subsequent danger of strangulation.
Never use the pushchair in the reclined position un-
less the child is firmly secured following the seat belt
instructions.
• Your POWERTWIN PRO has been designed with the
necessary safety so it can be used as a pram or a push-
chair. The headrest offers extra protection for the
child as a means of avoiding possible falls.

7- REMOVING THE REAR WHEELS

• To take the rear wheels off keep the release catches
pressed down on each wheel and then remove them.

8- ADJUSTING THE SUSPENSION

• The rear suspension has two positions of hardness.
14

9- FITTING THE HOODS

• To fit the front hood slide the hood supports into the
slots of the armrests.
• For the rear hood insert the hood supports into the PRO-
FIX rear slots.
Soft position Hard position
17
18
15
16
25