Publicidad
Idiomas disponibles
Idiomas disponibles
Step 12
(x32)
nail
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
With the help of another person, carefully turn your unit over on its front side. Make sure the unit
is square. Position the back panel as shown. Align the back panel equally with outside edges and
nail straight through into back edges as shown.
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
10
After back panel is attached,
lightly tap each plastic foot
(10) onto the shelf (E) until
fully seated.
littleseedskids.com
10
7
(x2)
plastic foot
10
E
Make sure edge of back panel is
flush with bottom edge of shelf.
"raw surface shown"
I
19
Notch location in
back panel.
B
7
Publicidad
