Publicidad
Step 19
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE
INSTALLED PROPERLY.
Assure that the unit is square. Distance from corner to corner must be equal as shown.
Position the back panel as shown on the back edges of the unit making sure the notch in
the back panel is positioned at the safety bracket location. Align bottom edge of back
panel with lower edge of bottom (E). Align side edges with edge of left and right panels
(A&B) and nail straight into back edges as shown.
11
littleseedskids.com
11
x34
#A21110
P
B
E
28
Publicidad
