Lifesaver Bottle Guía Rápida De Usuario

Quick User Guide
INSTRUCTIONS
This quick user guide should be used in conjuction with the
Instruction Manual provided with your LIFESAVER
FIRST USE
ROUTINE USE
© 2007-2013 LIFESAVER
granted. LIFESAVER is a registered trade mark. The following are trademarks of the LIFESAVER
®
of companies:- FOR A HOSTILE WORLD™, FILL.PUMP .DRINK™, FAILSAFE™
Priming - Unscrew the base and fill with tap water, camp
1
water or water from a clean source. Screw to close. Let
stand for 5 mins.
Pump & Discard - Open teat, twist pump handle to
2
unlock and pump water out to drain. Repeat step 1 & 2
again. Your LIFESAVER
Caution! - When dipping the LIFESAVER
1
water source always close the protective cap.
Filling - Unscrew the base and fill with water.
2
This water can be from a tap, camp, river, lake, puddle,
ditch or other source. Use pre-filter disk when filling.
Pumping - Twist pump handle to unlock and pump a few
3
times. Twist pump handle to lock closed.
Drinking - Open snap-fit lid, pull teat with teeth or clean
4
hands and drink. Pump again to improve flow.
Operation & Storage - LIFESAVER
5
protected from freezing and shocks! Store your bottle in a
LIFESAVER
®
Systems. All rights reserved. Patents and registered designs pending and
®
bottle is ready for use.
®
bottle protective pouch (LSBP1).
bottle.
®
bottle into a
®
bottle should be
®
group
®