LED work floodlight LHZ
By purchasing this item, you have chosen a high-quality GEV
product. Please read these operating instructions carefully to
ensure correct operation. Keep these instructions in a safe
place so that you can refer back to them if necessary.
LED work floodlight operation
The highly versatile GEV LED work floodlight features a secure "S"
stand, 2-m cable and plug with earthing contact. The light beam
can be optimally aligned by positioning the floodlight and adjusting
the floodlight head.
This light contains built-in LED lamps. The lamps in the light cannot
be replaced.
Safety instructions
Under no circumstances does the warranty cover damage
resulting from failure to observe these instructions. Nor
do we accept liability for any indirect damage.
Similarly, we can accept no liability for any material
damage or bodily injury caused by mishandling or failure to
observe the safety instructions. No warranty claim may be made
in these cases.
In addition, for safety and compliance reasons, you are not
authorised to dismantle or alter the device in any way.
Installation
Slot the stand into the designated housing (Fig. A1).Insert the
screw with washer, adjust the angle of the floodlight head (Fig. B)
then screw tightly (Fig. A2).
Recycling instructions
This device may not be disposed of with unsorted household
waste. Owners of old devices are required by law to dispose
of this device correctly. Contact your town council for further
information.
4
Technical information
Operating voltage
Light colour
Colour rendering index
LED angle of radiation
Protection class
Protection type
Order number
Power consumption approx.
Luminous flux approx.
Approx. dimensions
width x height x depth in mm
Technical and design features may be subject to change without notice.
230 V ~, 50 Hz
6500 K
70
approx. 120°
I
IP 44
015722
015739
20 W
30 W
1700 lm
2550 lm
230 x 330 x 200
280 x 355 x 240
5