Display; Installing The Batteries - LABBOX Metria M10 Manual De Instrucciones

Display

Low battery alarm:
When the battery is depleted, the icon will
disappear.
Measurement mode icon:
Indicates the meter is in the measurement
mode.
Calibration mode icon:
Indicates the meter is in the calibration mode.

Installing the Batteries

1. Remove the battery compartment cover from the backside of meter.
2. Insert the three AA batteries into the battery compartment, note polarity.
3. Replace the battery compartment cover to its original position. Push the limiter until it locks.

If the batteries are depleted, the meter allows using the DC5V power adapter or the USB port on computer as a temporary
power supply. Note, take out the batteries.
Setting mode icon:
Indicates the meter is in the setting mode.
Data log icon:
Indicates the data is stored into memory.
Calibration icon:
Indicates the meter is calibrating.
Push