How To Use - Hamilton Beach 63266-MX Manual Del Usuario

How to Use

BEFORE FIRST USE: Wash bowl
and attachments in warm, sudsy
water; rinse and dry. Always
unplug mixer from electrical
outlet before inserting or
removing attachments.
4
Place bowl in bowl lock and turn
clockwise until bowl locks into
place.
4
w WARNING
attachments. Failure to do so can result in broken bones or cuts.
1
Always make sure mixer is
unplugged and setting control is
set to OFF ( ).
5
Insert attachment onto beater
shaft and press upward as far as
possible. Turn the attachment to
the right, hooking beater over pin
on shaft.
Cut and Crush Hazard. Unplug mixer before inserting or removing
2
Press up on mixer release
button.
6
Slide the narrow section of the
pouring shield collar under mixer
attachment.
3
Tilt mixer head
up.
7
Place pouring shield collar on
bowl.