Tabla de contenido
Publicidad
Step 7
wood joint connectors ❸ and to top side rail H, using hex
Attach the assembled short guardrail to top post A with
socket head bolts ❽ and hex caps ❼, as shown. Use
Allen key ⓬ to tighten the hex cap ❼.
bunk with flat head wood screws ❹. Make sure the slat
Attach a top slat K onto top side rails (H & I) of the top
touches the corner posts (as close to the headboard as
(H & I) with flat head wood screws ❹ and place the slats
possible). Attach the other slats K onto the top side rails
Z onto the top side rails (H & I), as shown.
NOTE: Salts (K & Z) must be attached
3
so that they curve up in the middle and
down on the ends.
4
8
3
7
3
X 2
X 2
X 12
X 2
17
Publicidad
Tabla de contenido
