Product Symbols - Philips IntelliVue MX40 Instrucciones De Uso

Warnings
• To avoid patient injury, assure that leadset is not positioned where leads
could become entangled around patient, or cause choking, strangulation,
or inhibit circulation in extremities.
• Protect the leadset instrument/trunk connector, and SpO
present), from becoming soaked with any liquid. Do not immerse the
connectors in any cleaning solution, disinfectant, or other liquid (the
connectors may be wiped with cleaner and disinfectant but never
immersed).
Patient Application
Visually inspect the ECG leadset (and SpO
before applying the patient cable to a patient.
• If any signs of damage or deterioration are seen, immediately discard the
patient cable following approved medical waste disposal methods
specified by local regulations or your patient care facility.
• If no visual damage is seen, apply the ECG leads to the patient following
standard AAMI or IEC practices (refer to the IntelliVue MX40
Instructions for Use).
• If the patient cable includes a SpO
application instructions supplied in the sensor's Instructions for Use. If a
SpO sensor is not used, be sure to cover the sensor connector using the
2
protective cap tethered to the patient cable, and securely store the capped
sensor connector inside the telemetry pouch.

Product Symbols

Product packaging symbols are defined below:
Refer to instruction
manual/booklet
°C
°F
°C
°F
Temperature Contains
Limitation No Latex
connector when present)
2
sensor connector, follow the sensor
2
o
o
A A A
Humidity Manufacturer
Limitation
2
connector (if
2
Non Sterile Prescription
use only