Safety Instructions - LIGHTSIDE 10 Manual De Usuario

ENGLISH
For your own safety, please read this user manual carefully before you initially start-up.
INTRODUCTION
Thank you for having chosen a LIGHTSIDE Safety Mirrorball.
Unpack your mirrorball. Before you initially start-up, please make sure that there is no
damage caused by transportation. Should there be any, consult your dealer and do not
use the device.

SAFETY INSTRUCTIONS

In order to ensure a safe operation, it is absolutely necessary for the user to follow the
safety instructions and warning notes written in this user manual.
Important: Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or problems.
The mirrorball must always be secured with a secondary attachment!
INSTALLATION
The installation must always be secured with a secondary safety attachment. This
secondary safety attachment must be constructed in a way that no part of the installa-
tion can fall down if the main attachment fails.
Procedure:
The mirror ball should be installed outside areas where persons may walk by or be
seated.
The mirrorball has to be installed out of the reach of people.
Caution: Mirrorballs may cause severe injuries when crashing down! If you have doubts
concerning the safety of a possible installation, do NOT install the mirrorball!
The mirrorball has to be secured via an appropriate safety chain. This chain has to be
built and constructed in a way that it can hold 12 times the weight for 1 hour without
any harming deformation.
The length of the chain must never exceed 100 cm.
Install the mirrorball chain with the screw-on chain link at the installation eyelet of the
mirrorball and tighten the xation screw.
Insert the fourth chain link of the mirrorball chain with the mirrorball in the screw-on
chain link and tighten the xation screw.
1