Cleaning And Maintenance - LIGHTSIDE 10 Manual De Usuario

ENGLISH
For overhead use, always install a safety chain on the mirrorball that can hold at least 12
times the weight of the installation. The safety chain must be slightly longer than the
mirrorball chain. Pull the safety chain through the attachment eyelet of the mirrorball
and in the attachment eyelet of the motor.
Make sure that the rotation of the mirrorball is never slowed down or stopped by
decoration material etc.
Make sure that no side forces can impact on the installation.
Please check in regular intervals, if the installation material (e. g. shackles, screw-on
carabines or screw-on chain links) or chain links have been deformed. Uninstall the
mirrorball immediately in such a case.

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations
are inspected by an expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations
are inspected by a skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly
connected and must not be corroded.
2) There must not be any deformations on housings, xations and installation spots
(ceiling, suspension, trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of
wearing (e.g. material abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g.
porous cables) or sediments. Further instructions depending on the installation spot and
usage have to be adhered by a skilled installer and any safety problems have to be
removed.
Maintenance and service operations are only to be carried out by authorized dealers.
SPECIFICATIONS
Diameter: 10 cm / 0,18kg
Diameter: 20 cm / 1kg
Diameter: 30 cm / 2kg
Diameter: 40 cm / 4kg
Diameter: 50 cm / 5kg
2