Pairing The Transmitter And Receiver - Marantz professional PMD-750T Guia Del Usuario

Pairing the Transmitter and Receiver

Pairing 1 transmitter with the receiver (automatic):
1. Turn on the receiver and it will enter pairing mode.
2. Turn on the transmitter and it will automatically pair
with the receiver.
Pairing 2 transmitters with the receiver (automatic):
1. Turn on the receiver and it will enter pairing mode.
2. Turn on the transmitters and they will enter pairing
mode. The first transmitter will automatically pair with
the receiver.
3. Once Transmitter 1 is paired, Transmitter 2 will pair to
the receiver. When Transmitter 2 is paired to the
receiver, the transmitter display will show "2 TX".
4. The receiver display will show "Mono" or "Stereo".
Press Enter to select it and use the navigation
buttons to switch between "Mono" and "Stereo".
Press Enter to confirm the choice.
Pairing 1 or 2 transmitters to the receiver (manual):
1. Turn on the receiver and transmitter(s).
2. Press the navigation buttons to move the cursor to
the TX icon. Once TX is highlighted, the icon will
display PAIR. On the transmitter(s), press Enter to go
into pairing mode and the icon will flash to wait for the
receiver to pair. Once paired, the icon will be lit solid.
3. The receiver display will show "Mono" or "Stereo".
Press Enter to select it and use the navigation buttons
to switch between "Mono" and "Stereo". Press Enter to
confirm the choice.
Note: The Output mode is automatically set to "Mono"
when only one transmitter is paired.
9