Button Control; Led Indicators - TaoTronics TT-BH07 Guia Del Usuario

Button Control

Function
Power ON
Power OFF
Play/Pause
Volume +/-
Play next/previous
Answer Phone Call
Hang up
Refuse phone call
Redial
Mute phone call
Reset
Operation
Press and hold the
Multifunction Button for 1
second
Press and hold the
Multifunction Button for 3
seconds
Press the Multifunction Button
once
Press the Volume +/- Button
Press and hold the Volume +/-
Button
Press the Multifunction Button
once
Press the Multifunction Button
once
Hold and press the
Multifunction Button for 1
second
Press the Multifunction Button
twice to re-dial the latest phone
number
Press both Volume +/- Button at
the same time to mute and
unmute phone call
Press and hold the Volume +/-
Button at the same time until
the LED Indicator ashes purple
3 times.

LED Indicators

LED indicator
Solid red
Solid blue
Flashes in red and blue
alternately
Flashes blue once every 5
seconds
Flashes red
▲Note: The unit will not automatically connect to a Bluetooth
device when switched on; please read the next section on how
to connect to your Bluetooth
®
How to Use
1.Charging
1)Connect the charging port with any USB charging adapter or
active computer USB port
2)Charging will start automatically with LED indicator turning red
3)The headset is fully charged when LED indicator turns blue
Note: Charge the headset at least once every 6 months when
not using for a long time.
2. Pairing
To pair with other Bluetooth device, you must rst bring the
®
headset into pairing mode:
1)Make sure the headset and your Bluetooth
to each other (within 3 feet);
Status
Charging
Fully charged
In pairing mode
Paired with a Bluetooth
®
device
Low battery
device.
device are next
®
®
5/6